How to install GIGABYTE Z390 AORUS Xtreme

This article was originally published on

Want to build a high-performing PC that can handle any task you throw at it? The GIGABYTE Z390 AORUS Xtreme is the perfect motherboard for you. It’s loaded with top-of-the-line features, including an Intel Core processor, DDR4 memory, and support for PCIe 4.0 devices.

In this guide, we’ll show you how to install the GIGABYTE Z390 AORUS Xtreme and get it up and running in no time. We’ll also go over some basic troubleshooting and complete a tutorial for those who want to install the GIGABYTE Z390 AORUS Xtreme.

Installation Precautions:

Here are some things to keep in mind while you’re installing the motherboard:

  • Make sure your PC is turned off and unplugged from any power source before you begin.
  • Don’t forget to discharge any static electricity from your body by touching a metal object before handling any sensitive electronic components.
  • Carefully read the instruction manual that came with your motherboard before beginning the installation.
  • Have all the necessary tools and materials on hand before you start, including a Phillips screwdriver, an anti-static wrist strap (if possible), and any cables or adapters that might be required.

Also Read:

Install CPU

To install CPU, open the socket by unlatching the load lever and swinging it out to the left. The load plate can now be removed. Place the processor in the socket, matching the gold triangle on the CPU with the socket’s triangle mark. Be careful not to drop or damage the processor.

Image Source: Simple Modz

Close the socket by lowering the load lever and locking it into place. The loading lever should snap into the locked position. If it doesn’t, check to make sure that the CPU is properly seated in the socket and try again.

Apply Thermal Paste

Thermal paste is a substance that helps to fill any gaps and improve contact between the CPU and heatsink, which in turn helps to dissipate heat more effectively.

Image Source: Simple Modz

To apply thermal paste, start by removing the protective cover from the bottom of the CPU. Next, apply a pea-sized amount of thermal paste to the center of the CPU. Be careful not to apply too much thermal paste, a little goes a long way.

Install Cooler Backplate

Image Source: Simple Modz

If you’re using an aftermarket cooler with a backplate, now is the time to install it. To do so, simply line up the backplate with the appropriate mounting holes on the motherboard and secure it in place with the supplied screws.

Also Read:

Install Heatsink and Cooler

With the backplate in place, you can now install the heatsink and cooler. Start by attaching the CPU cooler bracket to the socket. Depending on your cooler, this may be done with screws or a clip.

Image Source: Simple Modz

Next, attach the heatsink to the bracket. Again, depending on your cooler, this may be done with screws or a clip.

Install M.2 SSD

Image Source: Simple Modz

M.2 SSDs are the latest generation of solid-state storage devices and offer unparalleled speeds and performance. To install an M.2 SSD, simply insert it into the M.2 slot on the motherboard and secure it in place with the supplied screw.

Place PCIe Covers

Image Source: Simple Modz

The GIGABYTE Z390 AORUS Xtreme has two PCIe x16 slots and two PCIe x1 slots. If you’re not using all of the slots, be sure to place the included covers over the unused ones. This will help to prevent dust and debris from buildup.

Install RAM

Image Source: Simple Modz

To install RAM, simply insert the modules into the DIMM slots on the motherboard. Make sure that the notch on the module is lined up with the break on the slot. Apply even pressure to the module until it clicks into place.

Install Motherboard into the Case

Image Source: InSource IT

First, install the I/O shield into the case then line up the motherboard with the screw holes on the case and secure it in place with screws. Be careful not to overtighten the screws, which can damage the motherboard.

Install & Connect Power Supply

The power supply unit (PSU) provides power to the motherboard and all other components in the system. First, install the power supply into the case, then connect the 24-pin power connector to the motherboard.

Image Source: InSource IT

Next, connect any additional power cables that are required by your specific motherboard. These may include an 8-pin or 4-pin CPU power connector, PCIe power connectors, and/or SATA power connectors.

Install Storage

Image Source: InSource IT

Hard drives and solid state drives can now be installed into the case. Depending on your case, drives may be mounted in the front, back, or bottom of the case. Follow the instructions that came with your case for specific installation instructions.

Connect Front USB Panel

Image Source: InSource IT

The front USB panel can now be connected to the motherboard. First, find the header on the motherboard that is labeled “USB”. It will likely have a symbol next to it that looks like a triangle with two arrows.

Install GPU

Image Source: InSource IT

The graphics card is one of the most important components in a gaming PC. To install your GPU, first remove the protective cover from the PCIe slot. Next, insert the card into the slot and secure it in place with the supplied screws. Connect the power cable to GPU which is coming from the PSU.

Cable Management

After all of the components have been installed, it’s time to start thinking about cable management. This is an important step in building a PC, as it can help to improve airflow and prevent dust buildup.

Image Source: InSource IT

Start by routing all of the cables that you need behind the motherboard tray. If your case has cable routing holes, be sure to use them. Next, connect all of the cables to their respective components. Finally, tuck any excess cables out of the way to keep the interior of your case clean and tidy.


Q. Is the Gigabyte Z390 good for gaming?

A. Yes, the Gigabyte Z390 Aorus Xtreme is a great option for gaming. It has a robust feature set and offers excellent performance. It has two PCIe x16 slots for graphics cards, four DIMM slots for RAM, and supports M.2 SSDs. All these features make it a great option for gaming.

Q. Does the Gigabyte Z390 have an RGB header?

A. Yes, the Gigabyte Z390 Aorus Xtreme has an RGB header. You can use this header to connect an RGB LED strip to your motherboard. This will allow you to customize the look of your PC.

Q. Does the Gigabyte Z390 have Bluetooth?

A. No, the Gigabyte Z390 Aorus Xtreme does not have Bluetooth. However, it does have a built-in Wi-Fi adapter. This will allow you to connect to the internet wirelessly.


Building a PC can be a daunting task, but it’s definitely worth the effort. With your own custom-built machine, you’ll be able to play the latest games at max settings, enjoy smooth visuals and fast load times, and have complete control over the components and features.

Leave a Reply

Your email address will not be published. Required fields are marked *